Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VMPS records

Hi,

Can anybody help me that how many records can we hold in a vmps table/database.

Also how can we interoperate members from one vmps to an other vmps without manually entering mac addresses.

6 REPLIES
Silver

Re: VMPS records

In the VMPS world you have VMPS server switches and VMPS client switches. Only the VMPS server switches are downloading the database file from TFTP server. VMPS client switches do not download the database, but they speak to VMPS servers using the VQP protocol.

There is no way to do incremental uploads of the VMPS database records. After the database change on TFTP server the VMPS server(s) always need to download entire database from the TFTP server. It is simple TFTP download, there is no clever logic in it.

Re: VMPS records

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_3/confg_gd/vmps.htm#26751

look at this link may it will be helpful to you...and about replecation i also searching...

rate this post if it helps

regards

Devang

New Member

Re: VMPS records

Hi there,

Appreciated for your reply. i already read this article but it didn't help. Again my question was how many records can we hold in a vmps table/database. Also how can we interoperate members from one vmps to an other vmps without manually entering mac addresses.

Many thanks in advance

Regards

Nouman

New Member

Re: VMPS records

Hi,

We have tested with 22354 record on a model 4503 and that works, but today we have reached some limit because we get this message:2006 Jun 22 12:39:06 %SYS-3-SUP_DNLDAREAEXCEED:Download aborted. File size larger than downloadbuffer

number of records are 23461.

What shall we do?

Regards

Mats

Re: VMPS records

mats,

where this database of VMPS store... i think it will be depends on the size of memory... like NAT...your NAT pools enteries are depends on DRAM... similarly the database of VMPS may also depends on its Memory limitation...

regards

Devang

New Member

Re: VMPS records

We shall only use this box for VMPS. Nothing else are configured.

WS-C4503 Software, Version NmpSW: 8.1(1)

Copyright (c) 1995-2003 by Cisco Systems, Inc.

NMP S/W compiled on Jul 10 2003, 16:05:34

GSP S/W compiled on Jul 10 2003, 13:59:37

System Bootstrap Version: 5.4(1)

Hardware Version: 3.2 Model: WS-C4503 Serial #: FOX091505MN

Mod Port Model Serial # Versions

--- ---- ------------------ -------------------- -------------------------------

--

1 2 WS-X4013 JAB052008BP Hw : 3.2

Gsp: 8.1(1.0)

Nmp: 8.1(1)

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 65536K 40630K 24906K 16384K 5901K 10483K 480K 290K 190K

Uptime is 0 day, 1 hour, 47 minutes

167
Views
0
Helpful
6
Replies