I have 2 adsl lines which each one is attached to a cisco 877 router and both are attached to wan 1 and wan 2 ports of a netgear firewall. The routers are both on the same lan and have the same subnet (they have to be this way).
I need both of these routers to have a VPN to the datacentre. One has a VPN already which goes to a Cisco ASA 5510 but the application takes maximum available bandwidth.. I understand that you cannot have 2 VPNs from same subnets going in to the same location.
Would setting up another ASA 5510 with an external IP address, and setting up the other VPN to go in to this work?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...