1. If both sides have the same 3000, you can connect to the office, disconnect and connect to the client side. If you are trying to establish two connections symultaneously, most probably at least one of the concentrators will be set for "no split-tunneling" and will drop the connection.
2. If you mean to install two clients on the top of each other - it is not recomended.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...