cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
267
Views
0
Helpful
1
Replies

vpnclient enable

jhzepeda
Level 1
Level 1

I have a PIX 501 which was works fine. As soon as I issue the command "vpnclient enable", the workstations behind it stop working. I can ping anywhere from the Pix, but not from the workstations.

Here is my configuration.

dhcpd address 192.168.30.10-192.168.30.33 inside

dhcpd dns 192.168.1.2 24.130.4.8

dhcpd wins 192.168.1.2 192.168.10.2

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd auto_config outside

dhcpd option 150 ip 192.168.100.3

dhcpd enable inside

vpnclient server x.x.x.x

vpnclient mode client-mode

vpnclient vpngroup cisco password ********

vpnclient username david password ********

vpnclient enable

terminal width 80

1 Reply 1

carenas123
Level 5
Level 5

Try with the following commands instead of "vpnclient enable". "vpnclient connect" and by

"access-list 101 permit ip

vpngroup test split-tunnel 101"

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco