We're running MPLS on our network and are monitoring customer's CE router through the management CE (MCE). Can we setup more than one MCE on the network? For instance, we have a primary MCE and a secondary MCE. In case the primary MCE goes down, we are able to manage customer's CE through the second MCE.
If so, can the customer's CE router be provisioned by the VPNSC to also see the second MCE?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...