Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPS - speed and duplex settings on a Catalyst

What is the correct speed and duplex settings for a VPS connecting to a Catalyst 4006 - is it 10/half , 10/full , 100/half ,100/full or auto. We installed the network and had major issues with it set to 100/full - we changed to auto and have no issues. According to Cisco best practice , all ports should be manually set and not to auto

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: VPS - speed and duplex settings on a Catalyst

Our best practice is not to hard code

http://www.cisco.com/warp/public/473/103.html#subfirstthree

We suggest hardcoding only if the link partner has issues with auto-negotiating. Since you are not having any issues, I suggest you leave it at auto-negotiate

1 REPLY
Cisco Employee

Re: VPS - speed and duplex settings on a Catalyst

Our best practice is not to hard code

http://www.cisco.com/warp/public/473/103.html#subfirstthree

We suggest hardcoding only if the link partner has issues with auto-negotiating. Since you are not having any issues, I suggest you leave it at auto-negotiate

82
Views
0
Helpful
1
Replies
CreatePlease login to create content