Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VTP Config Issue

I just received a switch (2924 System image file is "flash:c2900xl-c3h2s-mz.120-5.WC10.bin") and I am having some issues doing anything with the VTP commands. The only option I have in conf t is vtp file. Anyone know why or how to resolve it?

switch(config)#vtp ?

file Configure IFS filesystem file where VTP configuration is stored.

switch(config)#vtp

switch#show vtp stat

VTP Version : 2

Configuration Revision : 0

Maximum VLANs supported locally : 254

Number of existing VLANs : 5

VTP Operating Mode : Server

VTP Domain Name :

VTP Pruning Mode : Disabled

VTP V2 Mode : Disabled

VTP Traps Generation : Disabled

MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 0x47 0xBD

Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: VTP Config Issue

Hi,

Enter the 'vlan database' command first. Then you can configure VTP under the resulting configuration mode...

Hope that helps - pls rate the post if it does.

Paresh

2 REPLIES
Purple

Re: VTP Config Issue

Hi,

Enter the 'vlan database' command first. Then you can configure VTP under the resulting configuration mode...

Hope that helps - pls rate the post if it does.

Paresh

Re: VTP Config Issue

Hi,

Do the following:

Switch# vlan database

Switch-vlan# ** Now you are in Vlan database config mode and you can configure the options here ***

HTH, Please rate if it does.

-amit singh

169
Views
0
Helpful
2
Replies