We have a CAT6009 with VTP Domain. My question concerns creating a VTP trunk over a leased line to a CAT4003 so that we can share our VTP domain. Is it possible of will we need to create another VTP domain on the other site?
I beleive you will want to create a VTP domain at the other site. Even if you could do this, it seems like asking for problems later.
I feel certain that you won't be able to create a VLAN trunk across the leased line. If you did, a significant portion of the capacity will be taken up with the Cats maintaining the trunk, as well as tags, etc. Keep in mind that this would essentially be bridging multiple VLANs across a leased line, as opposed to routing across the leased line. You really don't want to bridge across slow links...
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...