Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VTP problems

I have a big problem with VTP.

I have a VTP Server on a Catalyst 6000 and a client on a C3750 and my client doesn't learn any Vlan...

If I try to pass my client in transparent mode and then create manually the management vlan it's working.

Can anyone help me please?

6 REPLIES
Hall of Fame Super Bronze

Re: VTP problems

Please post from the CAT6000

sh vtp domain

and from CAT3750

sh vtp status

Silver

Re: VTP problems

Try to delete the vlan.dat file and then reload the switch. After that, reconfigure the VTP.

Let me know if this solves the problem,

Silver

Re: VTP problems

One more BIG THING. When you exit the vlan database configuration do not press CTRL+Z try to type exit otherwise the config changes won't be applied.

Regards,

New Member

Re: VTP problems

What version of VTP?

Try to see the name and password of vtp domain on both swicthes.

Set the vtp mode to client on the cat3750.

Re: VTP problems

check for the vtp domain name and the vtp version on both the switch... try to configure same on the both switch most probebly change your 3750 configuration for same vtp domain name and version of vtp as per your 6000.

rate this post if it helps

regards

Devang

New Member

Re: VTP problems

Hi

If you using secure mode, domain and password. check to see if the password has been configured on the client.

223
Views
0
Helpful
6
Replies