I have two 6509's both setup as VTP servers. I want to enable pruning on the entire VTP domain. Do I need to enable pruning on both 6509 servers or only one of them? Does that information propagate throughout the VTP domain?
VTP Pruning Mode : Disabled (Operationally Disabled) VTP V2 Mode : Enabled VTP Traps Generation : Disabled MD5 digest : 0xFB 0x70 0x4A 0x1A 0x46 0xE3 0xD7 0xE9 Configuration last modified by 127.0.0.70 at 7-14-15 15:25:50 Local updater ID is 127.0.0.70 on interface EO0/2 (first interface found) VTP version running : 2 # #conf t Enter configuration commands, one per line. End with CNTL/Z. #vtp pr ####(config)#vtp pruning ? ????
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.