Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WCCP in 4507R

Hi ,

I'm trying to configure 4507R ( 12.2(31)SG )to run WCCP as shown in the attachments.

1- I enable WCCP globally

2- In users VLAN redierct HTTP in .

3- In bluecoat configuration is

wccp enable

wccp version 2

service-group web-cache

forwarding-type l2

password cisco

home-router X.X.X.X ( L3 port IP in 4507R).

interface 0

end

I got the following error

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

Regards,

2 REPLIES
Silver

Re: WCCP in 4507R

Hi,

Looks like the I_SEE_YOU packets never reaches ProxySG. Perhaps you have a

local firewall dropping the packets?

WCCP is using UDP port 2048 for the control channel.

Then be sure that the ip of

wccp router is correct.

Then try without:

forwarding-type l2

password cisco

and see the doc at

http://www.bluecoat.com/downloads/support/BCS_tb_implementing_WCCP.pdf

Please let me know

HTH

Andrea

New Member

Re: WCCP in 4507R

Thank Andera ,

1- There is no firewall

2- I can Managet the Bluecocat from Users VLAN .

3- I tried with no password but no luck.

4- Cat4507R does not support GRE that is why I'm using forwarding-type l2 .

5- CoreSW1#sh ip wccp web-cache detail

WCCP Cache-Engine information:

Web Cache ID: X.X.X.X

Protocol Version: 2.0

State: NOT Usable

Redirection: L2

Packet Return: L2

Packets Redirected: 0

Connect Time: 00:02:11

AssigSW1#

Where X.X.X.X is the Bluecoat IP address.

Regards,

644
Views
0
Helpful
2
Replies