Anyone know *first-hand* if WCCP is supported on Catalyst 3650s? and with what code revs?
Posted documentation on CCO seems to conflict both itself and with the CCO feature navigator -- I actually bought a pair of 3750s based on several published documents saying WCCP is supported -- only to find out that is not the case. There is even more documentation (including a how-to configuration doc) on enabling WCCP on a 3550 and 3650 switch -- yet the feature navigator says WCCP isn't supported on ANY Catalyst switches except 6500s.
we do not support WCCP on either platform. It _is_ on the roadmap, but at this time, there is no ETA for supporting the feature. There are several mentions of WCCP support in the documentation, but they are in error, and documentation bugs have been filed to get this fixed.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...