web links with java commands dont work with a VLAN implementation
My network consists in one 2950 switch with 2 vlan's, one to access my corporate network and the other to directly access de internet, with a 802.1q trunk i forward the traffic of both vlans to the internet with a cisco 1760 one encrypted and the second just uses nat.
The conectivity is OK for both access, but when the users of the remote corporate vlan use SOME links (java links) they don't work.
I tried just conecting one corporate user directly to the router 1760 and configured just the remote access, and all links seems to work fine.
I guess this problem has something to do with the 802.1q frame tagging. I need to know how 802.1q can cause this and a solution of course. Thanks for all your help.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...