Webmail "publishing" on non-standart port Cisco router 2921
We are going to "publish"(I don't knowif this is correct word to use;)) our mail server on Cisco 2921. As far as I know it can be easily achieved with static NAT. But the thing is, we don't want to publish it on standart 443 port i.e. we want router to listen for https connections on other port than 443, and then redirect this connection to internal server with private ip.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...