Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

what does it mean? POST: Configuring Switch Parameters: Passed Error

There was an error message in my catalyst 3500XL,

The details of the message as shown as following:

C3500XL Boot Loader (C3500-HBOOT-M) Version 12.0(5)XU, RELEASE SOFTWARE (fc1)

Compiled Mon 03-Apr-00 17:47 by swati

starting...

Base ethernet MAC Address: 00:02:7e:60:ae:80

Xmodem file system is available.

Initializing Flash...

flashfs[0]: 110 files, 3 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 3612672

flashfs[0]: Bytes used: 2767360

flashfs[0]: Bytes available: 845312

flashfs[0]: flashfs fsck took 3 seconds.

...done Initializing Flash.

Boot Sector Filesystem (bs:) installed, fsid: 3

Parameter Block Filesystem (pb:) installed, fsid: 4

Loading "flash:c3500XL-c3h2s-mz-120.5-XU.bin"...###########################################################################################################################################################

File "flash:c3500XL-c3h2s-mz-120.5-XU.bin" uncompressed and installed, entry point: 0x3000

executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)XU, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled Mon 03-Apr-00 17:31 by swati

Image text-base: 0x00003000, data-base: 0x00301398

Initializing C3500XL flash...

flashfs[1]: 110 files, 3 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 3612672

flashfs[1]: Bytes used: 2767360

flashfs[1]: Bytes available: 845312

flashfs[1]: flashfs fsck took 3 seconds.

flashfs[1]: Initialization complete.

...done Initializing C3500XL flash.

C3500XL POST: System Board Test: Passed

C3500XL POST: Daughter Card Test: Passed

C3500XL POST: CPU Buffer Test: Passed

C3500XL POST: CPU Notify RAM Test: Passed

C3500XL POST: CPU Interface Test: Passed

C3500XL POST: Testing Switch Core: Passed

C3500XL POST: Testing Buffer Table: Passed

C3500XL POST: Data Buffer Test: Passed

C3500XL POST: Configuring Switch Parameters: Passed Error.

Failed address lines - walking ones.

sent:

1 REPLY
Bronze

Re: what does it mean? POST: Configuring Switch Parameters: Pass

This looks like a hardware issue as it's failing the Power On Self-Test.

357
Views
0
Helpful
1
Replies
CreatePlease to create content