Just finished confguring CiscoView for our Cat 5500 and noticed that on some ports that have no connection to them (the ports are orange on the map) one light is lit green. Can someone please explain the meaning on that?
Green means that the port is up, orange means down. in CV at the bottom right corner of the screen there's an icon for Color Legen that tells you what each colo mean. So, you're saying that one port to which there's nothing connected to it, CV is showing it as green=up?. Did you check to see that you have the latest CV device pkg installed for this Cat5K?
Yes, the CV is working fine. I see all the 12 blades on that switch with all the ports on the map. However, usually, a port that is up is green and has 2 green lights under it and I have about 6 ports that are all orange but have one light green ( the right hand side light) and the other light is dark.
Thanks for your reply. After dinking around with CV a bit more, I saw a pattern, where the right hand side light would indicate that the Configured Speed on the port was manually set to something other than Auto Detect and the left hand side light would indicate that the Duplex was set to half. Is that possible?
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...