Re: What does "please grant permission to launch ciscoview" mean
You need to install the CD One patch with JRE 1.3.1 on your server. Then delete the current version of JRE installed on your workstation. Open CW2000 through your broswer, it will prompt you to download and install 1.3.1.
I WOULDN'T RECOMMEND USING THE "LATEST" VERSION OF JRE AS THE APPLICATION WILL NOT RECOGNIZE IT AND STILL PROMPT YOU TO DOWNLOAD AND INSTALL 1.3.1.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...