10-30-2002 12:49 PM - edited 03-02-2019 02:31 AM
I have a 2610 with 24MB RAM and 8MB flash. I found that IOS 12.1 will support it. But which minimal feature version of 12.1 I should get in order to use CEF load balancing as I'm limited on RAM and flash. What IOS image would do the trick? Thanks.
Solved! Go to Solution.
10-30-2002 01:15 PM
12.1(1) would work just fine.
10-30-2002 01:40 PM
IP only feature set can be used.
12.1(1) is the minimum in the 12.1 ios RANGE YOU CAN USE.
What you have is a 12.1(17). It also supports CEF in a IP only feature set. Hardware requirements are just fine, 8mb flash/ 24 mb ram.
You can even upgrade the IOS to a 12.2 range, 12.2(12) or 12.2.(12a) with a IP only feature set with the same hardware requirements.
10-30-2002 01:15 PM
12.1(1) would work just fine.
10-30-2002 01:27 PM
You mean it's in any feature? So the image c2600-i-mz.121-17.bin with only IP features would do OK? Thanks again.
--Chuck
10-30-2002 01:18 PM
Cef became the default switching mechanism in 12.0
10-30-2002 01:40 PM
IP only feature set can be used.
12.1(1) is the minimum in the 12.1 ios RANGE YOU CAN USE.
What you have is a 12.1(17). It also supports CEF in a IP only feature set. Hardware requirements are just fine, 8mb flash/ 24 mb ram.
You can even upgrade the IOS to a 12.2 range, 12.2(12) or 12.2.(12a) with a IP only feature set with the same hardware requirements.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide