04-25-2006 08:23 AM - edited 03-03-2019 02:56 AM
What IOS version / feature set is required for inter-VLAN routing?
I've got a 2620 running c2600-i-mz.121-5.bin and it says the encapuslation dot1q command is invalid.
04-25-2006 09:52 AM
Hi,
c2600-is-mz.12.2-15.T17 supports 802.1Q.
You can use the Software Advisor/Cisco Feature Navigator tool on CCO to find the correct IOS for the features you need.
Pls. rate all helpful posts.
Sundar
04-25-2006 08:27 PM
Hi Friend,
You need to have minimum of IP PLUS feature to support encapsulation command.
If you want to know which image in your train that is 12.1(5) support you need to upgrade to
c2600-is-mz.12.1-5.bin
This image in your image train has IP PLUS feature
HTH, if yes please rate the post.
Ankur
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: