Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

What is acceptable memory utilization for the Cat 2950?

We recently started upgrading our 2950s from 12.1(14)EA1a to 12.1(22)EA7 in order to run SSHv2 for network management all 2950s have 20Mb DRAM and 8Mb Flash. Generally the 2950s in the network use approximately 56% of memory, with the new image and SSHv2 they use 80%. Is this a problem or can we run with this high memory utilization. CPU utilization for all 2950s is between 12 and 18%.

6 REPLIES
Silver

Re: What is acceptable memory utilization for the Cat 2950?

Can we see the output please from:

show processes cpu

bye for now,

Ajaz

New Member

Re: What is acceptable memory utilization for the Cat 2950?

See attachemnt.

Thanks

Silver

Re: What is acceptable memory utilization for the Cat 2950?

I need to take a look at the command output when the CPU is high.

The one you have kindly provided is showing relatively low CPU utilization.

best regards

Ajaz Nawaz

Purple

Re: What is acceptable memory utilization for the Cat 2950?

Think he is commenting on "memory utilization" not CPU utilization .

New Member

Re: What is acceptable memory utilization for the Cat 2950?

What is best practice for memory (not cpu) utilization? I've added SSHv2 services and has caused memory utilization to rise from 605% to 80% average.

New Member

Re: What is acceptable memory utilization for the Cat 2950?

That should read 65% to 81%.

177
Views
0
Helpful
6
Replies
CreatePlease to create content