Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

what is the use of transmit delay in ospf protocol?

we can set the transmit delay by using the " ip ospf transmit-delay" command.But i am not clear about the usage of transmit-delay.So can you please explain the usage of transmit-delay for me in ospf protocol?

1 REPLY

Re: what is the use of transmit delay in ospf protocol?

Syntax: ip ospf transmit-delay seconds

no ip ospf transmit-delay

The number of seconds required to transmit a link state update packet. Valid values are 1 to 65535.

Description: The transmit delay timer increments the age of LSAs in update packets to accommodate transmission and propagation delays for the interface. The timer is more important on very low speed links where the transmission delay is more significant.

Use the ip ospf transmit-delay seconds command to configure the number of seconds added to the age of the LSA to accommodate slow transmission and propagation.

Use the no ip ospf transmit-delay command to set the transmit delay to the default value of 1 second.

Factory Default: 1 second.

1715
Views
2
Helpful
1
Replies
CreatePlease to create content