Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

what's the initial configurations to set up a 2511 access server with a 2511, and two 2501s in a lab environment?

I'm setting up a lab with two 2511s and 2 2501s. one of the 2511s is my access server. how do i do the initial configurations so that i can access all routers thru the access server? thx

1 REPLY
Anonymous
N/A

Re: what's the initial configurations to set up a 2511 access se

Select one the the 2511 as your commserver.

Connect the console ports of the other routers to

the octal cable of the access server.

Give an IP address to the ethernet interface of the access server.

Configure the access server like:

line 1 16

no exec

transport input all

Then in order to access the router connected to the first port,

you have to do:

telnet ip 2001

ip = ethernet ip address.

To access the other routers,

telnet ip 200x

ip = ethernet ip address

x = port number

92
Views
0
Helpful
1
Replies