Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Where is vlan access-map on 6509 hybrid IOS?

I can't find this command, or any significant commands to manipulate VLANs in hybrid-IOS on the MSFC. What would be required as prerequisites in terms of software images, hardware and configurational caveats tat would prevent this command from being usable.

TIA,

-John

-- Hardware/Software

WS-C6509 Software, Version NmpSW: 6.4(5)

System Bootstrap Version: 5.2(1)

Hardware Version: 2.0 Model: WS-C6509

PS1 Module: WS-CAC-1300W

Mod Port Model Versions

1 2 WS-X6K-SUP1A-2GE Hw : 1.0

Fw : 5.2(1)

Fw1: 5.1(1)CSX

Sw : 6.4(5)

Sw1: 6.4(5)

WS-F6K-PFC Hw : 1.0

3 48 WS-X6248-RJ-45 Hw : 1.2

Fw : 5.1(1)CSX

Sw : 6.4(5)

5 0 WS-X6182-2PA Hw : 1.4

Fw : 12.1(8b)E15

Sw : 12.1(8b)E15

15 1 WS-F6K-MSFC Hw : 1.2

Fw : 12.1(8b)E15

Sw : 12.1(8b)E15

IOS (tm) MSFC Software (C6MSFC-JSV-M), Version 12.1(8b)E15, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Image text-base: 0x60008950, data-base: 0x61872000

ROM: System Bootstrap, Version 12.0(3)XE, RELEASE SOFTWARE

BOOTFLASH: MSFC Software (C6MSFC-JSV-M), Version 12.1(8b)E15, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

cisco Cat6k-MSFC (R5000) processor with 114688K/16384K bytes of memory.

R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache

1 REPLY
Cisco Employee

Re: Where is vlan access-map on 6509 hybrid IOS?

Since you are running hybrid, you'll need to use VACLs on the Supervisor Engine

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/confg_gd/acc_list.htm

128
Views
5
Helpful
1
Replies
CreatePlease to create content