Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Which IOS version support leap-map under EIGRP stub ?

I read description of leap-map under EIGRP stub on latest PACKET magazine.

But I can't find any information about that which IOS version support it.

any comments is appreciated!

9 REPLIES
Purple

Re: Which IOS version support leap-map under EIGRP stub ?

Hi,

This command was introduced in IOS version 12.3(14)T.

Hope that helps - pls rate the post if it does.

Paresh

New Member

Re: Which IOS version support leap-map under EIGRP stub ?

thanks.

Why can't I find it on cisco Feature Navigator or IOS command tool? And I can't find it on 12.3T command reference on http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123tcr/123tip2r/ip2_c1gt.htm#wp1124273.

Can u give me URL ?

Purple

Re: Which IOS version support leap-map under EIGRP stub ?

Check this out:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hirp_r/rte_eih.htm

Hope that helps - pls rate the post if it does.

Paresh

New Member

Re: Which IOS version support leap-map under EIGRP stub ?

thanks.

Maybe I didn't express exactly. I need "eigrp stub ... leak-map " and not "ip summary ... leak-map "

I can't find information on URL which you provided.

Purple

Re: Which IOS version support leap-map under EIGRP stub ?

My apologies for that... I believe that feature is in the pipeline and has not been released yet.

Paresh

New Member

Re: Which IOS version support leap-map under EIGRP stub ?

anyway,thanks!

Purple

Re: Which IOS version support leap-map under EIGRP stub ?

Hey Henry,

Guess what.. I've got an 1841 running 12.4(2)T1 that actually supports it ! Also, I've got a 2651XM running 12.3(14)T4 that also supports it.

So my guess is that the feature has mysteriously appeared in the 12.3T/12.4T trains without any fanfare from Cisco.

Hope that helps - pls rate the post if it does.

Paresh

Re: Which IOS version support leap-map under EIGRP stub ?

Paresh,

Actually, that feature has been integrated into the IOS. I don't know when it was introduced. But my lab router is running 12.4(5a) and does support 'eigrp stub leak-map'.

R6(config)#router eigrp 1

R6(config-router)#eigrp stub ?

connected Do advertise connected routes

leak-map Allow dynamic prefixes based on the leak-map

receive-only Set IP-EIGRP as receive only neighbor

redistributed Do advertise redistributed routes

static Do advertise static routes

summary Do advertise summary routes

As long as you understand the application of leak-map the same theory needs to be applied in a stub setup where a more specific route can be leaked when the stub router summarizes the routes.

Hope that helps.

--Sundar

New Member

Re: Which IOS version support leap-map under EIGRP stub ?

thanks

I'm in doubt that why cisco didn't mention it on document . I can't use it on my production enviorment until it appear on cisco offical document.

311
Views
0
Helpful
9
Replies
CreatePlease login to create content