I need to route 8 separate class C ip-networks - no vlans. Which product is the best? When I had to route 3 or 4 networks i used an 2611XM Router with a 4-Port NIC. But with 8 networks !? I dont need BGB or OSPF, just static routing.
If you want to route IP among 8 separate Class C IP Ethernet LANs, the C3550-24-EMI will do it. But if you only need static routing, you can save yourself US$2,000 by just getting the C3550-24-SMI. The SMI software will let you do IP static routing and RIP.
You can assign Layer 3 IP addresses to individual physical Ethernet interfaces; or assign layer 2 VLANs to the ports, then create interface VLANs that take on the Layer 3 IP addressing. Depends what you need.
Apart from konigl's suggestion to get a 3550-smi, you could also consider getting a 2950 (or any 802.1q capable switch) and keep the 2611xm to do the routing between the vlans (using a dot1q trunk between router and switch).
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.