Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Why am I getting these HSRP messages?

Note: The "not found" are actual vlan IPs and "found" are standby(virtual) IPs.

1w1d: HSRP: Vl2 API active virtual address 10.18.88.220 not found

1w1d: HSRP: Vl2 API active virtual address 10.18.88.222 found

1w1d: HSRP: Vl2 API active virtual address 10.18.88.220 not found

1w1d: HSRP: Vl4 API active virtual address 10.18.88.238 found

1w1d: HSRP: Vl2 API active virtual address 10.18.88.220 not found

1w1d: HSRP: Vl208 API active virtual address 10.18.88.241 found

1w1d: HSRP: Vl4 API active virtual address 10.18.88.236 not found

1w1d: HSRP: Vl208 API active virtual address 10.18.88.242 not found

1w1d: HSRP: Vl2 API active virtual address 10.18.88.222 found

1w1d: HSRP: Vl4 API active virtual address 10.18.88.238 found

6 REPLIES
Hall of Fame Super Gold

Re: Why am I getting these HSRP messages?

Prerak

I am not sure that we can tell from the information posted what is causing the messages. It would be helpful if you could provide the configuration of the interfaces and post the output of show standby.

HTH

Rick

New Member

Re: Why am I getting these HSRP messages?

sil08-custrtr-1#show standby brief

P indicates configured to preempt.

|

Interface Grp Prio P State Active Standby Virtual IP

Vl2 102 254 Active local 10.18.88.221 10.18.88.222

Vl4 104 254 Active local 10.18.88.237 10.18.88.238

Vl10 10 254 Active local 10.18.88.189 10.18.88.190

Vl20 20 254 Active local 10.18.88.125 10.18.88.126

Vl40 40 254 Active local 10.18.88.29 10.18.88.30

Vl208 208 254 Active local 10.18.88.243 10.18.88.241

interface Vlan2

description VLAN2-SIG

ip address 10.18.88.220 255.255.255.240

standby 102 ip 10.18.88.222

standby 102 priority 254

!

interface Vlan4

description VLAN4-OAM

ip address 10.18.88.236 255.255.255.240

standby 104 ip 10.18.88.238

standby 104 priority 254

!

Hall of Fame Super Gold

Re: Why am I getting these HSRP messages?

Prerak

Thanks for posting this information. Could we also get the same output from the other standby partner?

HTH

Rick

New Member

Re: Why am I getting these HSRP messages?

P indicates configured to preempt.

|

Interface Grp Prio P State Active Standby Virtual IP

Vl2 102 200 Standby 10.18.88.220 local 10.18.88.222

Vl4 104 200 Standby 10.18.88.236 local 10.18.88.238

Vl10 10 200 Standby 10.18.88.188 local 10.18.88.190

Vl20 20 200 Standby 10.18.88.124 local 10.18.88.126

Vl40 40 200 Standby 10.18.88.28 local 10.18.88.30

Vl208 208 200 Standby 10.18.88.242 local 10.18.88.241

interface Vlan2

description VLAN2-SIG

ip address 10.18.88.221 255.255.255.240

standby 102 ip 10.18.88.222

standby 102 priority 200

!

interface Vlan4

description VLAN4-OAM

ip address 10.18.88.237 255.255.255.240

standby 104 ip 10.18.88.238

standby 104 priority 200

!

New Member

Re: Why am I getting these HSRP messages?

New Member

Re: Why am I getting these HSRP messages?

No one knows about these messages?

222
Views
0
Helpful
6
Replies
CreatePlease to create content