Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Why GSR always reports %GSR_ENV-0-SHUTDOWN....

The following is my GSR log,i wonder why there always are so many reports.

Thanks.

----------

GSR1#show log

Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)

Console logging: disabled

Monitor logging: level debugging, 0 messages logged

Buffer logging: level debugging, 113948 messages logged

Trap logging: level informational, 113985 message lines logged

Log Buffer (16384 bytes):

rature at 31 deg C > 0 deg C

Nov 1 12:48:33: %GSR_ENV-0-SHUTDOWN: Slot 24 48V supply at 53 V < 65408 V

Nov 1 12:48:33: %GSR_ENV-0-SHUTDOWN: Slot 26 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:48:33: %GSR_ENV-0-SHUTDOWN: Slot 26 48V supply at 53 V < 65408 V

Nov 1 12:49:34: %GSR_ENV-0-SHUTDOWN: Slot 24 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:49:34: %GSR_ENV-0-SHUTDOWN: Slot 24 48V supply at 53 V < 65408 V

Nov 1 12:49:34: %GSR_ENV-0-SHUTDOWN: Slot 26 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:49:34: %GSR_ENV-0-SHUTDOWN: Slot 26 48V supply at 53 V < 65408 V

Nov 1 12:50:35: %GSR_ENV-0-SHUTDOWN: Slot 24 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:50:35: %GSR_ENV-0-SHUTDOWN: Slot 24 48V supply at 53 V < 65408 V

Nov 1 12:50:35: %GSR_ENV-0-SHUTDOWN: Slot 26 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:50:35: %GSR_ENV-0-SHUTDOWN: Slot 26 48V supply at 53 V < 65408 V

Nov 1 12:51:36: %GSR_ENV-0-SHUTDOWN: Slot 24 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:51:36: %GSR_ENV-0-SHUTDOWN: Slot 24 48V supply at 53 V < 65408 V

Nov 1 12:51:36: %GSR_ENV-0-SHUTDOWN: Slot 26 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:51:36: %GSR_ENV-0-SHUTDOWN: Slot 26 48V supply at 53 V < 65408 V

Nov 1 12:52:37: %GSR_ENV-0-SHUTDOWN: Slot 24 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:52:37: %GSR_ENV-0-SHUTDOWN: Slot 24 48V supply at 53 V < 65408 V

Nov 1 12:52:37: %GSR_ENV-0-SHUTDOWN: Slot 26 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:52:37: %GSR_ENV-0-SHUTDOWN: Slot 26 48V supply at 53 V < 65408 V

Nov 1 12:53:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface POS4/0, changed state to up

Nov 1 12:53:38: %GSR_ENV-0-SHUTDOWN: Slot 24 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:53:38: %GSR_ENV-0-SHUTDOWN: Slot 24 48V supply at 53 V < 65408 V

Nov 1 12:53:38: %GSR_ENV-0-SHUTDOWN: Slot 26 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:53:38: %GSR_ENV-0-SHUTDOWN: Slot 26 48V supply at 53 V < 65408 V

Nov 1 12:54:39: %GSR_ENV-0-SHUTDOWN: Slot 24 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:54:39: %GSR_ENV-0-SHUTDOWN: Slot 24 48V supply at 53 V < 65408 V

Nov 1 12:54:39: %GSR_ENV-0-SHUTDOWN: Slot 26 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:54:39: %GSR_ENV-0-SHUTDOWN: Slot 26 48V supply at 53 V < 65408 V

Nov 1 12:55:40: %GSR_ENV-0-SHUTDOWN: Slot 24 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:55:40: %GSR_ENV-0-SHUTDOWN: Slot 24 48V supply at 53 V < 65408 V

Nov 1 12:55:40: %GSR_ENV-0-SHUTDOWN: Slot 26 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:55:40: %GSR_ENV-0-SHUTDOWN: Slot 26 48V supply at 53 V < 65408 V

Nov 1 12:56:41: %GSR_ENV-0-SHUTDOWN: Slot 24 Inlet sensor temperature at 31 deg C > 0 deg C

Nov 1 12:56:41: %GSR_ENV-0-SHUTDOWN: Slot 24 48V supply at 53 V < 65408 V

----------

GSR1# show ver

Cisco Internetwork Operating System Software

IOS (tm) GS Software (GSR-P-M), Version 12.0(11)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled Fri 16-Jun-00 18:30 by htseng

Image text-base: 0x60010908, data-base: 0x6172C000

-----------

2 REPLIES

Re: Why GSR always reports %GSR_ENV-0-SHUTDOWN....

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

New Member

Re: Why GSR always reports %GSR_ENV-0-SHUTDOWN....

hi guy,

try use this command " sh env all " to check this information on your box .

Tran

120
Views
0
Helpful
2
Replies