cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
583
Views
0
Helpful
1
Replies

why I could not execute "sh flash" on UBR7223?(ergent!!!)

plum.tian
Level 1
Level 1

On a UBR7223,I inserted a PCMCIA in slot0,the system boot from it normally.I can use "dir disk0:"etc command on the ubr7223,

but I could not use "sh flash","dir slot0:"!I have the following questions:

1.Is disk0 slot0?Are they same?

2.if the above answer is "yes",why I encouter such kind of problem?

3.If the above answer is "no",could you give me a clear explaination?

Thanks in advance!!!

Some info I copied from the machine Ubr7223:

Router#dir slot0:

%Error opening slot0:/ (Bad device info block)

Router#sh flash file

Error getting file system status.

Router#sh flash all

Open device slot0 failed (Bad device info block)

Error getting file system status.

Router#sh disk0:

******** ATA Flash Card Geometry/Format Info ********

ATA CARD GEOMETRY

Number of Heads: 4

Number of Cylinders 735

Sectors per Cylinder 32

Sector Size 512

Total Sectors 94080

ATA CARD FORMAT

Number of FAT Sectors 46

Sectors Per Cluster 8

Number of Clusters 11708

Number of Data Sectors 93920

Base Root Sector 220

Base FAT Sector 128

Base Data Sector 252

1 Reply 1

ssoberlik
Level 4
Level 4

Here is a link which describes in detail , how the UBR7223 boots with a flash and PCMCIA card.

http://www.cisco.com/warp/public/130/sw_upgrade_highendrouters_23233.html

http://www.cisco.com/warp/public/63/pcmciamatrix.html

ATA PCMCIA Flash disks use different command syntax when referring to the PCMCIA slot. Substitute the command syntax disk0: or disk1: if you are using an ATA PCMCIA Flash disk instead of slot0: or slot1: which refers to Linear PCMCIA Flash memory cards. When you see an error message such as "%Error opening slot0: (Device not ready)", try using the dir disk0: command

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: