04-03-2004 09:55 PM - edited 03-02-2019 02:46 PM
Hi, I have centrol router 3640 with over 20 remote sites running EIGRP over frame relay. But the eigrp neighbors are not stable. I check the frame relay circuit. no problem. I only I can see the peer down information from the show ip eigrp events. Any idea?
50 16:02:46.449 Peer up: 10.1.1.53 Serial0.521
51 16:02:46.040 Peer down end, handle: 0
=======================
B2#sh ip eigrp nei
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq Type
(sec) (ms) Cnt Num
19 10.1.1.10 Se0/1.524 12 00:21:11 1321 5000 0 545
8 10.1.1.54 Se0/1.530 13 01:43:41 306 1836 0 3630
34 10.1.1.2 Se0/1.526 13 02:10:28 227 1362 0 3250
38 10.1.1.74 Se0/1.140 11 02:35:41 75 1140 0 5616
31 10.1.2.2 Se0/0.528 10 03:21:22 108 1140 0 7466
23 10.1.1.34 Se0/1.536 12 03:36:22 68 1140 0 7632
7 10.1.2.34 Se0/0.529 14 04:59:13 315 1890 0 4167
13 10.1.1.50 Se0/1.533 12 05:30:06 118 1140 0 4001
3 10.1.2.66 Se0/0.550 11 05:34:19 281 1686 0 3777
20 10.1.1.30 Se0/1.522 12 05:36:13 177 1062 0 4250
27 10.1.2.10 Se0/0.539 10 05:48:18 126 1140 0 105
5 10.1.2.46 Se0/0.551 11 06:19:58 237 1422 0 6992
40 10.1.1.26 Se0/1.527 11 06:29:12 92 1140 0 4976
29 10.1.2.62 Se0/0.459 14 09:25:12 56 1140 0 2575
16 10.1.1.46 Se0/1.531 11 13:34:09 54 1140 0 6982
26 10.1.1.38 Se0/1.538 10 14:48:50 76 1140 0 5419
6 10.1.2.54 Se0/0.552 11 15:00:07 76 1140 0 6201
17 10.1.1.58 Se0/1.535 11 16:32:21 61 1140 0 7312
22 10.1.1.18 Se0/1.534 12 20:36:00 132 1140 0 7757
30 10.1.2.42 Se0/0.546 13 21:07:10 68 1140 0 6879
32 10.1.1.6 Se0/1.523 11 21:37:21 52 1140 0 3009
2 10.1.1.70 Se0/1.27 12 21:43:21 64 1140 0 6450
36 10.1.2.30 Se0/0.542 11 21:46:23 95 1140 0 3959
33 10.1.1.62 Se0/1.133 11 22:55:43 64 1140 0 7010
37 10.1.2.70 Se0/0.688 12 23:34:22 53 1140 0 6951
21 10.1.2.6 Se0/0.519 13 1d01h 48 1140 0 6927
25 10.1.1.106 Se0/1.755 12 1d01h 45 1140 0 4195
11 10.1.2.14 Se0/0.541 11 1d05h 189 1140 0 6202
0 10.1.1.114 Se0/1.680 14 1d07h 30 1140 0 8693
12 10.1.1.22 Se0/1.537 13 1d09h 72 1140 0 5252
15 10.1.1.14 Se0/1.525 11 1d09h 85 1140 0 4124
1 10.1.1.42 Se0/1.532 10 1d12h 110 1140 0 7030
24 10.1.2.26 Se0/0.543 13 1d12h 140 1140 0 7697
14 10.1.2.22 Se0/0.544 14 1d18h 79 1140 0 6891
10 10.1.2.38 Se0/0.548 14 1d19h 49 1140 0 6282
18 10.1.2.18 Se0/0.545 12 1d19h 61 1140 0 7361
H Address Interface Hold Uptime SRTT RTO Q Seq Type
(sec) (ms) Cnt Num
39 10.1.1.110 Se0/1.456 12 1d20h 164 1140 0 5548
35 10.1.2.58 Se0/0.547 12 2d00h 65 1140 0 5183
9 10.1.1.102 Se0/1.126 14 2d02h 48 1140 0 6282
28 10.1.2.50 Se0/0.540 12 2d03h 117 1140 0 5946
4 10.1.1.66 Se0/1.25 11 2d18h 67 1140 0 6469
====================
04-06-2004 06:52 AM
Do you have eigrp neighbor logging turned on? If you do, we'd need to start with that output, since that would tell us why the neighbors are dropping--hold timer expirations, retransmission timeout exceeds, or possibly sia's are the three main culprits, most of the time.
:-)
Russ.W
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: