Why "out bcast pkts" on a frame-relay PVC created on a subinterface?
On a Cisco3640 running IOS 12.2(6) IP-only the number of "out bcast pkts" and "out bcast bytes" are increasing even when on the subinterface CDP is disabled and the subinterface is passive for the routing protocol.Debugging the broadcast packets (on the router on the other side of the F/R PVC) learned me that the broadcast traffic is tftp traffic with source address the ip-address of the subinterface and destination address 255.255.255.255.Is it possible to stop this kind of traffic?It seems that this kind of traffic is related to the auto-install topic through tftp but I can't find the link.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...