I had a 6509 switch recycled power to its 6748-GE-TX module. I like to understand why this module reset caused the system to restart, and what this "system restart" means. Please see the syslog messages (I didn't include all messages).
Mar 16 09:52:49.452 EST: %OIR-SP-3-PWRCYCLE: Card in module 9, is being power-cycled off (Module experiencing Port asic error)
Mar 16 09:52:49.720 EST: %C6KPWR-SP-4-DISABLED: power to module in slot 9 set off (Module experiencing Port asic error) 00:00:04: %SYS-CFC9-5-RESTART: System restarted --
Mar 16 09:53:57.497 EST: %OIR-SP-6-INSCARD: Card inserted in slot 9, interfaces are now online
Re: Why this 6509 module reset caused system restart?
The message is a bit misleading. The "system restarted" message is coming from the CFC daughter card on the module
"%SYS-CFC9-5-RESTART: System restarted -"
So the entire switch did not restart, but just the module and daughter card. Now, I'm saying that based on the provided messages. You should check the system uptime in the "show ver" and/or the reset logs stored in the NVRAM log "show log" as well.
But, as I said, if the only indication of "System restarted" was in the above syslog, then that's only referring to the CFC.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.