Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

wic-1adsl error

Dear Professional

environment is Cisco 2650 router, using wic-1adsl,

and line is Korea KT ADSL

What's the matter ?

following output is debug atm ... command.

OK LED : ON

CD LED : OFF

*Mar 1 09:26:14: DSL: Send ADSL_OPEN command.

*Mar 1 09:26:14: DSL(ATM0/0: Using subfunction 0x15

*Mar 1 09:26:14: DSL(ATM0/0): Sent command 0x3

*Mar 1 09:26:16: DSL(ATM0/0): 1: Modem state = 0x8

*Mar 1 09:26:19: DSL(ATM0/0): 2: Modem state = 0x8

*Mar 1 09:26:21: DSL(ATM0/0): 3: Modem state = 0x8

*Mar 1 09:26:23: DSL: Received response: 0x22

*Mar 1 09:26:23: DSL: Open failed: Protocol error received -- retrying

*Mar 1 09:26:23: DSL: Send ADSL_OPEN command.

*Mar 1 09:26:23: DSL(ATM0/0: Using subfunction 0x15

*Mar 1 09:26:23: DSL(ATM0/0): Sent command 0x3

*Mar 1 09:26:25: DSL(ATM0/0): 1: Modem state = 0x8

*Mar 1 09:26:26: DSL: Received response: 0x22

*Mar 1 09:26:26: DSL: Open failed: Error in early non-CRC message or in first C

RC-covered message -- retrying

*Mar 1 09:26:26: DSL: Send ADSL_OPEN command.

*Mar 1 09:26:26: DSL(ATM0/0: Using subfunction 0x15

*Mar 1 09:26:26: DSL(ATM0/0): Sent command 0x3

.

.

.

  • Other Network Infrastructure Subjects
1 REPLY
New Member

Re: wic-1adsl error

my problem was resolved.

the cause was the DSLAM device.

273
Views
0
Helpful
1
Replies
This widget could not be displayed.