Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Would like to check if this IOS supports IPSEC software

Hi Gurus,

Would like to check the IOS Below if can support IPSEC implementation.

I have checked on the config t --command,but didn;t find any IPSEC.

WOUld like to confirm if tis IOS supports,if not, can i do an upgrade to diff IOS?

---------------------------------------

Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version 12.3(8)T3, RELEASE SOFTWARE (fc1)

---------------------------------------

thanks !

ken

4 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Bronze

Re: Would like to check if this IOS supports IPSEC software

Ken,

"k9o3sy" indicates the product is part of the

IP/FW/IDS PLUS IPSEC 3DES - feature set.

what command are you looking for ?

Please read this URL

http://www.cisco.com/en/US/customer/tech/tk583/tk372/tech_configuration_examples_list.html

on how to configure IPSEC with Cisco routers.

Please rate helpful posts.

Thanks

Bronze

Re: Would like to check if this IOS supports IPSEC software

Silver

Re: Would like to check if this IOS supports IPSEC software

Hi Kenny

You have posted:

"Cisco IOS Software, C1700 Software (C1700-Y-M), Version 12.3(4)T7, RELEASE SOFTWARE (fc2)

....

System image file is "flash:c1700-y-mz.123-4.T7.bin"

This is an IP IOS Feature Set. It does NOT support IPSec

Hope this helps

Re: Would like to check if this IOS supports IPSEC software

Hi

IOS is not available freely over net as its a properity software and subject to legal actions.

If you have another router purchased by you yourself, then you can download it from there.Otherwise, you need to have a valid CCO login from which you can download the software for free.

You can ask your hardware supplier regarding the same.I am sure he will be able to help you.

Regards

JD

18 REPLIES
Hall of Fame Super Gold

Re: Would like to check if this IOS supports IPSEC software

Ken

In general IOS images identified with K9 in the image identification do support IPSec. I do not recognize the specific identication line that you provide. If you would also post the part of show version that includes the file name in flash it would give us a better identification of the image and we might be better able to answer your question.

But baiscally I believe that yes your imaage does support IPSec. What commands were you looking for to verify support of IPSec?

HTH

Rick

Hall of Fame Super Bronze

Re: Would like to check if this IOS supports IPSEC software

Ken,

"k9o3sy" indicates the product is part of the

IP/FW/IDS PLUS IPSEC 3DES - feature set.

what command are you looking for ?

Please read this URL

http://www.cisco.com/en/US/customer/tech/tk583/tk372/tech_configuration_examples_list.html

on how to configure IPSEC with Cisco routers.

Please rate helpful posts.

Thanks

Community Member

Re: Would like to check if this IOS supports IPSEC software

Thanks Rick,Edison!

Just to confirm with the sh-ver..Will rate

you guys post once confirmed with the sh ver.:)

thanks again!

----------------------------------------

Router#sh ver

Cisco IOS Software, C1700 Software (C1700-Y-M), Version 12.3(4)T7, RELEASE SOFTW

ARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2004 by Cisco Systems, Inc.

Compiled Mon 19-Jul-04 11:45 by eaarmas

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

Router uptime is 2 hours, 51 minutes

System returned to ROM by power-on

System image file is "flash:c1700-y-mz.123-4.T7.bin"

Cisco 1760 (MPC860P) processor (revision 0x500) with 54868K/10668K bytes of memo

ry.

Processor board ID FOC08300U1F (2150418580), with hardware revision 0000

MPC860P processor: part number 5, mask 2

1 FastEthernet interface

1 Serial(sync/async) interface

1 ISDN Basic Rate interface

32K bytes of NVRAM.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Community Member

Re: Would like to check if this IOS supports IPSEC software

Btw, Edison,

The link you given me not able to access.

Need to have a CCO account. Can provide me the actual link with a public access then?

thanks!

ken

Bronze

Re: Would like to check if this IOS supports IPSEC software

Re: Would like to check if this IOS supports IPSEC software

Hi

Though your IOS support the IPSec feature, following is the link which can assist you further:

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

Pls rate helpful posts.

Regards

JD

Community Member

Re: Would like to check if this IOS supports IPSEC software

But guys,

the funny thing is there is no crypto command under the config term mode.

Am i missing something??

As i believe the ipsec should have this command to configure ipsec rite?

Or any links that can point me to IPSEC configuration will be much appreciated! :D

thks!

ken

Community Member

Re: Would like to check if this IOS supports IPSEC software

hi,

i have checked on the tools image, there is no IPSEC support,Am i going wrong somewhere..?

thanks!

rgds,

kenny

Bronze

Re: Would like to check if this IOS supports IPSEC software

Silver

Re: Would like to check if this IOS supports IPSEC software

Hi Kenny

You have posted:

"Cisco IOS Software, C1700 Software (C1700-Y-M), Version 12.3(4)T7, RELEASE SOFTWARE (fc2)

....

System image file is "flash:c1700-y-mz.123-4.T7.bin"

This is an IP IOS Feature Set. It does NOT support IPSec

Hope this helps

Community Member

Re: Would like to check if this IOS supports IPSEC software

You are right, Jolmo!

So, the next question will be, can I upgrade the IOS to diff IP Feature Set.

Any cost involved here to get the IOS below with the feature set? I have check that

the IP/ADSL/FW/IDS Plus/IPSEC 3DES can be used for IPSEC>

Can I download the IOS and use it?

thks!

ken

Re: Would like to check if this IOS supports IPSEC software

Hi

I dont know why you are confusing things over......Pls be amandament that which router you want to configure.....the first one or the second one.....

Earlier Post:

Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version 12.3(8)T3, RELEASE SOFTWARE (fc1)

Current Post:

Cisco IOS Software, C1700 Software (C1700-Y-M), Version 12.3(4)T7, RELEASE SOFTW

ARE (fc2)

Pls rate helpful posts.

Regadrs

JD

Community Member

Re: Would like to check if this IOS supports IPSEC software

Sorry Desai for the confusion,

it will be this version..

Cisco IOS Software, C1700 Software (C1700-Y-M), Version 12.3(4)T7, RELEASE SOFTW

ARE (fc2)

Now i am almost there..just need to know if

the IOS feature set can be upgraded without

any costing...

Silver

Re: Would like to check if this IOS supports IPSEC software

It depends on your service level. Do you have any service contract for this router?

If not, you will have to order.

287
Views
0
Helpful
18
Replies
CreatePlease to create content