My question relates to WRED and some of it configurable parameters. I have configured WRED on the class-default queue inside a CBWFQ configuration. It is working as expected.
The class-default queue is quite heavily utilised as such I not only see random drops but also tails drops. About 75% of the drops are WRED with other 25% being tail drops.
Should I be aiming to eliminate tail drops all together and if so would you suggest I increase the MPD so WRED starts dropping more packets when the queue builds up or should I modify the min/max queue thresholds to start dropping packets earlier.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...