Thanks for your response. I am trying to upload the config to a CW2K (running on a W2K box) machine, that, supposedly, has a TFTP server embedded in it and I am getting "access violation" error message.
Thanks for your response. I have tried your suggestion but to no avail. Besides, I can tftp that file fine to my W2K box that's running a TFTP server. Why can't I do the same to the CW2K box? Any other suggestions please?
I tried your latest suggestion in creating a file (or a placeholder) in the cscopx/tftpboot directory on my CW2K machine and then uploading the config into it, but could not do it again. This is what I get:
Upload configuration to sw22.cfg on 172.21.72.100 (y/n) [n]? y
TFTP connection fail(0).
TFTP: Abnormal Termination
I made sure everyone has the write access to both the cscopx and the tftpboot directory.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...