12-08-2003 12:14 AM - edited 03-02-2019 12:11 PM
hi All,
I want to get Wrr configuration information on cisco catalyst 3550. For example:
wrr-queue bandwidth 20 20 20 40
Which mib contains this information?
Thanks
12-15-2003 08:53 AM
The document given below talks about wrr configuration.
QoS Scheduling and Queueing on the Catalyst 3550 Switches
http://www.cisco.com/en/US/tech/tk389/tk813/technologies_tech_note09186a00801558cb.shtml
You can use the SNMP Object Navigator to find the required MIB.(link given below)
http://www.cisco.com/cgi-bin/Support/Mibbrowser/unity.pl
Thanks.
12-15-2003 05:01 PM
hi,
Thanks for your reply.
I searched the following URL:
ftp://ftp.cisco.com/pub/mibs/supportlists/cat3550/cat3550-supportlist.html
But I found no information about WRR configuation mib. I just find a CISCO-CONFIG-COPY-MIB to get a copy of cisco configuration file.
Thanks
04-18-2018 08:03 PM
The following link has a sample config:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00800948e6.shtml
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: