Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WS-C2950T-24 EI and SSH Access

Hi, i've bought one 2950T Ehnanced image, on the cisco web i saw that this switch has SSH access configurable.

I tried to configure it, but i can't find the right command configuration, anyone can help me?

i tried this configuration:

line vty 0 4

transport input XXXX

where XXXX should be SSH, but it is not present.

4 REPLIES

Re: WS-C2950T-24 EI and SSH Access

hi

Can you post out the exact ios code name which is installed in your switch ??

As per the datasheet it does support SSHV2 if you have EI image installed in your switch ..

http://cisco.com/en/US/products/hw/switches/ps628/products_data_sheet09186a00801cfb64.html

regds

New Member

Re: WS-C2950T-24 EI and SSH Access

The IOS version is 12.1(22)EA6

this should works with SSH?

thanks in advance.

Hall of Fame Super Silver

Re: WS-C2950T-24 EI and SSH Access

Can you please post the exact bin image you are using?

The IOS release you cited is available both with and without the crypto support. Crypto support is required to use ssh.

yes crypto and web mgmt: c2950-i6k2l2q4-tar.121-22.EA6.tar

yes crypto: c2950-i6k2l2q4-mz.121-22.EA6.bin

no crypto: c2950-i6q4l2-mz.121-22.EA6.bin

The "k" inidcator in the image name indicates crypto (3DES, ssh, ssl, snmpv3 - see http://www.cisco.com/en/US/products/sw/iosswrel/ps5460/products_qanda_item09186a00801af2c6.shtml ).

New Member

Re: WS-C2950T-24 EI and SSH Access

c2950-i6q4l2-mz.121-22.EA6.bin

I've this image...so i need to download the image with, crypto..thanks so much.

BR.

1484
Views
0
Helpful
4
Replies
CreatePlease to create content