I have a few of these switches and tried to use the latest stencils but the shape is actually wrong and the port groups on the switch front are wrong. Where can I download the correct stencil? Thanks in advance
There may not be an existing stencil for the product you are interested in. If you believe that a stencil or a particular product should be included, you can post a request to the Cisco Support Community: Go to https://supportforums.cisco.com/index.jspa. Under Online Tools and Resources, choose Technical Documentation Ideas.
This is the online answer for non existent stencils. it might serve to get ones conrrected too.
I have been attempting to diagram and document our Catalyst 4506-E switch. All of the option cards were not proportioned properly, leaving gaps between cards. The Catalyst 4500 VSS didn't have the 1400ACV power supply shape. Also, none of the Supervisor cards had the correct port configuration I needed for my WS-X45-Sup6-E card. There is no way to correct for the disproportional shape. If you attempt to correct it, the image becomes noticeably distorted. I have posted a thread about this and uploaded an image to display the issue many of the current Cisco Visio Stencils have.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...