Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WS-C4006 How to save the configuration

Hi,

I have Cisco 4006 Switch model; normally we don't need to save the configuration on this device but somehow this device is not saving any configuration.

Can someone help me; how to save the configuration. Attached is the IOS version detail.

****************** show version ******************

WS-C4006 Software, Version NmpSW: 7.1(2)

Copyright (c) 1995-2002 by Cisco Systems, Inc.

NMP S/W compiled on Feb 7 2002, 16:53:43

GSP S/W compiled on Feb 07 2002, 15:24:55

System Bootstrap Version: 5.4(1)

Hardware Version: 3.2 Model: WS-C4006

3 REPLIES

Re: WS-C4006 How to save the configuration

hi

can u verify whether this command is enabled in ur box or not ?

set config mode text auto-save enable

hope you are aware of this cli which does save the configs automatically after every 30mins.

regds

New Member

Re: WS-C4006 How to save the configuration

Dear Kumar,

I have this command enabled in my switch:

set config mode text nvram

Can you please also let me know if autosave is enable then where it will save the configuration and in what filename?

BR, Asghar

Cisco Employee

Re: WS-C4006 How to save the configuration

It would normally be written to NVRAM. There is no need for text mode in 4006. I would stick with binary mode(set config mode binary).

494
Views
0
Helpful
3
Replies