The front panel on the Switch Fabric Module has a 2-line by 20-character LCD display. The display allows you to monitor the module's input/outport port traffic and local bus traffic. The display also shows system information.
Two push button switches control the LCD display:
SELECTThis switch is used for LCD display menu selection.
NEXTThis switch is used to scroll to the next item on the LCD display menu
You can configure an lcd banner, using the command "set banner lcd "
The following example shows how to modify the LCD banner for the Switch Fabric Module:
Console> (enable) set banner lcd &HelloWorld!&
LCD banner set
Console> (enable) show banner
MOTD banner:
LCD config:
Hello
World!