Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WS-SUP720-3B Boot

I was wondering can help me with this error message or point me to a document on CCO that goes into detail about the boot process of a SUP720 running code 12.2(18)SXD4.

%PFREDUN-SP-4-BOOTSTRING_INVALID: The bootfile slavesup-boo

tflash:s71033-jk9o3sv-mz.122-18.SXD4.bin is not present in standby

May 3 16:20:56.736: %PFREDUN-SP-4-BOOTSTRING_INVALID: The bootfile slavedisk0:s

71033-jk9o3sv-mz.122-18.SXD4.bin is not present in standby

May 3 16:20:56.736: %PFREDUN-SP-4-BOOTSTRING_INVALID: The bootfile slavesup-boo

tflash is not present in standby

May 3 16:20:58.252: %PFINIT-SP-5-CONFIG_SYNC: Sync'ing the startup configuratio

n to the standby Router[OK]

The boot variable for both supervisors do not have any statemets pointing to slavesup-bootflash: etc....

1 REPLY
Cisco Employee

Re: WS-SUP720-3B Boot

slavesup-bootflash: is the standby supervisor's sup-bootflash:

So the configuration is automatic and will not reflect in the bootstring.

However, it looks like there is a typo in the filename:

s71033-jk9o3sv-mz.122-18.SXD4.bin

should read

s72033-jk9o3sv-mz.122-18.SXD4.bin

HTH,

Bobby

*Please rate helpful posts.

424
Views
0
Helpful
1
Replies
CreatePlease to create content