Yes, You need 2 MEM-MSFC3-1GB in order to upgrade both the SP and RP to 1 GB each. I used the 2 of them when I upgraded my Sup 720 as there are 2 DRAM dimm slots on SUP 720 and it requires MEM-MSFC3-1GB in each DIMM in order to upgrade the RP and SP both to 1 GB.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...