Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

WS-SVC-CMM-6E1 Configuration

Dear Professional,

I have a 7609 router with 9 module. I have WS-SVC-CMM Module installed in module 1 & 2 both of them are equipped with (1) WS-SVC-CMM-6E1, (1) WS-SVC-CMM-ACT and (1) WS-SVC-CMM-24FXS.

I will replaced the old 3660 router with 7609 router. The old router is connected to traditional PBX with 5 E1's.

How can I configure the WS-SVC-CMM-6E1. When I make a sh run the E1 port is not showing and is not showing any voice port. Unlike in the old 3660 router whenever you are inserting any E1 card the router will detect the E1.

Please be advice.

Thanks

1 REPLY
Blue

Re: WS-SVC-CMM-6E1 Configuration

does your 7609 have the proper IOS to see/operate the hardware?

use the featureNavigator to determine if your IOS has the functionality for that type of hardware and what IOS you may need:

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

search by platform for 7600-CMM.

290
Views
0
Helpful
1
Replies
CreatePlease to create content