WS-SVC-NAM-2 Management VLAN

[smithm228]

I have installed the NAM in a 6509.

I am unable to ping the ip address of the NAM from the Management of the switch it resides in.

I am unable to ping anything from the NAM session.

My management VLAN is 500.

I have been able to change the management vlan to 500 on other devices, such as IDS and PIX, but I do not see a means of changing the management VLAN for the NAM.

Can this be done, or do I have to "no shut" vlan 1.

Thank You

Mike

[rmushtaq]

- NAM Model?

- Software version running on the NAM?

- Software version running on the Cat6K switch?

[smithm228]

Network Analysis Module WS-SVC-NAM-2

NAM application image version: 2.2(1a)

Maintenance image version: 1.1(1)

NAM Daughter Card Micro code version: 1.14.1.21 (NAM)

BIOS Version: 4.0-Rel 6.0.4

Version 12.2(14)SX1

Mike

[rmushtaq · Accepted solution]

To configure a VLAN for the NAM management port, you must use the "analysis module management-port access-vlan " command on the switch to make it work:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_14487.htm#115287

[domenic.baggetta]

try this

analysis module 6 management-port access-vlan 500