Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WS-X6148A-GE-45AF MODULE DUPLEX ISSUE.

Hi,

We are having 7912 Ip Phones connected to WS-X6148A-GE-45AF modules in 6500 switch.

If we leave the Port duplex and speed to auto or force it to 100 full in switch side we are getting lot of runts and undersize errors.

Due to this voice quality of the phones are really bad.

Moreover if we enter sh cdp nei 9/43 det command where the phone is connected we are getting the below information .

sh cdp nei 9/43 det

Port (Our Port): 9/43

Device-ID: SEP0014A9AE05D9

Device Addresses:

IP Address: 172.25.38.128

Holdtime: 144 sec

Capabilities: HOST PHONE

Version:

CP7912-v8-00-1-051117A

Platform: Cisco IP Phone 7912

Port-ID (Port on Neighbors's Device): Port 1

VTP Management Domain: unknown

Native VLAN: unknown

Duplex: unknown

System Name: unknown

System Object ID: unknown

Management Addresses: unknown

Physical Location: unknown

We are not getting the Duplex:unknown error in the ports where 7960 phones are connected.

But in the ports where 7960 are connected we are geting duplex mismatch errorlogs.

We can force the duplex setting in 7960 phone but there is no option available for forcing the setting in 7912G Phones.

Please let me know if you have any resolutions for this problem.

Regards

Krishna.

2 REPLIES

Re: WS-X6148A-GE-45AF MODULE DUPLEX ISSUE.

hi

can you try setting 100/Full and 100/Auto on the

switch side and check for the results ??

i did search the datasheets of both 7960 and 7912 for the duplex setting but could get only about the speed settings..

regds

New Member

Re: WS-X6148A-GE-45AF MODULE DUPLEX ISSUE.

Hi Prem,

I did try setting to 100/full and 100/auto

but no go.

we thought of upgrading the catos to 8.5(3) from 8.4(4) in one of the swithch.

Krishna.

182
Views
0
Helpful
2
Replies