Lately we purchased a WS-X6148A-GE-45AF card, but I don't get it to work.
It seems that the 6509 does not recognises it. I suppose that the IOS is not recent enough, but on Cisco.com I only find the necessary CatOS version.
Does anybody know which IOS I should use?
The switch runs 12.2(17d)SXB6 now. Below is the result of a "show mod".
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 48-port 10/100 mb RJ45 WS-X6148-RJ45V SAL0651AF9A
4 48 unknown FRU type (major = 0x6003, mino WS-X6148A-GE-45AF SAL09486VS2
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAD084609B9
6 2 Supervisor Engine 720 (Hot) WS-SUP720-3B SAD084609BM
7 8 8 port 1000mb ethernet WS-X6408-GBIC SAD03141815
8 16 16 port 1000mb MTRJ ethernet WS-X6416-GE-MT SAD041104PP
9 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL08445KEZ
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 000b.bea9.17a0 to 000b.bea9.17cf 1.2 5.4(2) 8.3(0.110)TE Ok
4 0016.466a.0100 to 0016.466a.012f 1.2 Unknown Unknown PwrDown
5 0011.21ba.82e8 to 0011.21ba.82eb 4.1 8.1(3) 12.2(17d)SXB Ok
6 0011.21b5.5f7c to 0011.21b5.5f7f 4.1 8.1(3) 12.2(17d)SXB Ok
7 00d0.589b.3580 to 00d0.589b.3587 2.1 4.2(0.24)VAI 8.3(0.110)TE Ok
8 00b0.c2f1.53ec to 00b0.c2f1.53fb 1.0 5.3(1) 8.3(0.110)TE Ok
9 0012.4301.d578 to 0012.4301.d58f 2.1 12.2(14r)S5 12.2(17d)SXB Ok
Mod Sub-Module Model Serial Hw Status
--- --------------------------- ------------------ ------------ ------- -------
5 Policy Feature Card 3 WS-F6K-PFC3B SAD084605AV 1.1 Ok
5 MSFC3 Daughterboard WS-SUP720 SAD084705RA 2.2 Ok
6 Policy Feature Card 3 WS-F6K-PFC3B SAD084609S3 1.1 Ok
6 MSFC3 Daughterboard WS-SUP720 SAD08450B5Z 2.2 Ok
9 Centralized Forwarding Card WS-F6700-CFC SAL09018CRB 2.0 Ok
Mod Online Diag Status
--- -------------------
1 Pass
4 Unknown
5 Pass
6 Pass
7 Pass
8 Pass
9 Pass
Thank you.
