Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

WS-X6148A-GE-45AF unknown FRU type

Lately we purchased a WS-X6148A-GE-45AF card, but I don't get it to work.

It seems that the 6509 does not recognises it. I suppose that the IOS is not recent enough, but on Cisco.com I only find the necessary CatOS version.

Does anybody know which IOS I should use?

The switch runs 12.2(17d)SXB6 now. Below is the result of a "show mod".

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 48 48-port 10/100 mb RJ45 WS-X6148-RJ45V SAL0651AF9A

4 48 unknown FRU type (major = 0x6003, mino WS-X6148A-GE-45AF SAL09486VS2

5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAD084609B9

6 2 Supervisor Engine 720 (Hot) WS-SUP720-3B SAD084609BM

7 8 8 port 1000mb ethernet WS-X6408-GBIC SAD03141815

8 16 16 port 1000mb MTRJ ethernet WS-X6416-GE-MT SAD041104PP

9 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL08445KEZ

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

1 000b.bea9.17a0 to 000b.bea9.17cf 1.2 5.4(2) 8.3(0.110)TE Ok

4 0016.466a.0100 to 0016.466a.012f 1.2 Unknown Unknown PwrDown

5 0011.21ba.82e8 to 0011.21ba.82eb 4.1 8.1(3) 12.2(17d)SXB Ok

6 0011.21b5.5f7c to 0011.21b5.5f7f 4.1 8.1(3) 12.2(17d)SXB Ok

7 00d0.589b.3580 to 00d0.589b.3587 2.1 4.2(0.24)VAI 8.3(0.110)TE Ok

8 00b0.c2f1.53ec to 00b0.c2f1.53fb 1.0 5.3(1) 8.3(0.110)TE Ok

9 0012.4301.d578 to 0012.4301.d58f 2.1 12.2(14r)S5 12.2(17d)SXB Ok

Mod Sub-Module Model Serial Hw Status

--- --------------------------- ------------------ ------------ ------- -------

5 Policy Feature Card 3 WS-F6K-PFC3B SAD084605AV 1.1 Ok

5 MSFC3 Daughterboard WS-SUP720 SAD084705RA 2.2 Ok

6 Policy Feature Card 3 WS-F6K-PFC3B SAD084609S3 1.1 Ok

6 MSFC3 Daughterboard WS-SUP720 SAD08450B5Z 2.2 Ok

9 Centralized Forwarding Card WS-F6700-CFC SAL09018CRB 2.0 Ok

Mod Online Diag Status

--- -------------------

1 Pass

4 Unknown

5 Pass

6 Pass

7 Pass

8 Pass

9 Pass

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: WS-X6148A-GE-45AF unknown FRU type

Hi

According to Cisco documentation, you will need minimum IOS 12.2(18)SXF or 12.2(18)SXF2 in order to support this card:

http://www.cisco.com/en/US/products/hw/switches/ps708/prod_release_note09186a00801c8339.html#wp2563113

HTH

2 REPLIES
Silver

Re: WS-X6148A-GE-45AF unknown FRU type

Hi

According to Cisco documentation, you will need minimum IOS 12.2(18)SXF or 12.2(18)SXF2 in order to support this card:

http://www.cisco.com/en/US/products/hw/switches/ps708/prod_release_note09186a00801c8339.html#wp2563113

HTH

New Member

Re: WS-X6148A-GE-45AF unknown FRU type

Thank you.

Somehow i failed to find this myself.

905
Views
0
Helpful
2
Replies
CreatePlease to create content