Anyone know of any reasons why MAC addresses wouldn't be learned when servers are connected to the 10/100/1000 48 port RJ45 WS-X6548-GE-TX card, when we swap them to a 10/100 RJ45 WS-X6148-RJ-45 card we have no problems.
IOS is 12.1(19)E and the card is supported on this.
Can you paste the output of
remote command switch show platform hardware asicreg revati slot X port, where X is the slot number?
I'm checking to see if you are hitting the following bug
It doesn't seem to like that command:
#remote command switch show platform hardware asicreg revati slot 11 port
Line has invalid autocommand "show platform hardware asicreg revati slot 11 port
Here's a show version:
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-JK2SV-M), Version 12.1(19)E, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 31-May-03 16:12 by hqluong
Image text-base: 0x40008C00, data-base: 0x41CBE000
ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-JK2SV-M), Version 12.1(19)E, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)
cetcrt001 uptime is 4 weeks, 5 days, 22 hours, 9 minutes
Time since cetcrt001 switched to active is 4 weeks, 5 days, 22 hours, 8 minutes
System returned to ROM by power-on (SP by power-on)
System restarted at 17:05:32 MEST Thu Jul 17 2003
System image file is "sup-bootflash:c6sup22-jk2sv-mz.121-19.E.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
cisco WS-C6513 (R7000) processor (revision 1.0) with 458752K/65536K bytes of memory.
Processor board ID TBM06481844
R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
116 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.
32768K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 458752K/65536K bytes of memory.
Configuration register is 0x102
I now have the output:
-sp#sh platform hardware asicreg revati slot 11 port 48
Is something connected to this port? If not can you connect a device and if it is having connectivity issues, paste the output of
"sh platform hardware asicreg revati slot 11 port 48 error-count"
The counters are cleared on read
There's nothing connected as we had to move the servers off this card onto another 48 port 10/100 card in order to get them to work, but yesterday when we had a laptop connected we saw the issue on a different port in slot11, however it's not on there now.
Just looking at an ARP packet it is 42bytes on the wire, so coule we be looking at the problem described in the bug you mentioned?
The counters do not indicate you are hitting this bug. I suggest that connect few devices on the 6548, recreate the problem and open a TAC Case for this one