WS-X6816-GBIC became PwrDown when IOS upgrade to 12.2(18)SXD7
When IOS upgraded from 12.1(13)E8 to 12.2(18)SXD7, one of WS-X6816-GBIC module (in slot5) become PwrDown in show module output but another one (in slot 4) is ok. The only difference I can find is DFC hardware version. Is there any limitation about this ?
Re: WS-X6816-GBIC became PwrDown when IOS upgrade to 12.2(18)SXD
Watch the logs as it boots up , my guess there is a problem with the board . We had a brand new card for a 6500 with a problem and the box will power it off if it see's a problem. Ended up RMA'ing the card . Does it show anything when you do a "show diagnostic result all" command ?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.