We want to upgrade WS-X6K-S2-MSFC2 ( hybrid mode ) MSFC2 IOS to 12.1.26E7. I checked 12.1E release note, it mention : "For large networks or complex configurations, we recommend upgrading the memory on the MSFC2 before you load Release 12.1(8a)E or later". Can anyone tell me in which condition we must upgrade the default MSFC2 memory ( 128MB ) to recommend memory ( 256MB or 512MB )?
This is in regards with running the complex routing protocols like IS-IS, OSPF and BGP. Specially in case of BGP where you need to download the full routing tables. If you have a larger network and you are running OSPF or IS-IS, then you might want to have more memory.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...